Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for CAN bus. It's subtle, doesn't have key fobs or LED indicators and is concealed in the vehicle's wiring.
It also allows the user to turn off the system temporarily through Transport Mode in the event of renting out their vehicle. This guide will walk you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key cloning attacks, hacking attacks and relay attacks. The system is connected directly to the ECU of your vehicle and protected by a pin code that you choose. It is undetectable by thieves using diagnostic scanners and other advanced methods. It cannot be disabled with circuit cuts.
The system is simple to use, however professional installation is recommended to ensure a clean connection with the ECU of your vehicle. Installers certified by Thatcham can assist with the installation and programing of your Ghost system. They can also recommend a tracking or alarm system to complete the security package for your vehicle.
To avoid an accidental deployment of short circuits or airbags The installer must first disconnect your battery. After that, the installer can safely begin work. Basic hand tools can be used to make precise connections. A multimeter is useful to test electrical values. Insulation tape and cable tie are vital to secure connections and keep wiring neat. The Ghost Immobiliser user's manual will provide specific guidelines specific to your particular model.
It is important to choose the right grounding spot that is free of any paint or debris during installation. Installers must also ensure that the immobiliser's wires, CAN H and the CAN L are connected to the proper ECU ports. Depending on the model, these wires could need to be soldered or plugged into. Using a high-quality connector is recommended to ensure a durable and reliable connection.
Transport Mode can be activated by the client after the installation is complete. This allows the vehicle to be utilized by valet parking companies or mechanics without needing to know the pin code. The customer has to press the service icon on the dashboard five times within 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's an excellent choice for those who rent out their vehicles often on platforms such as Turo. Immobilisers can lower insurance costs, since it lowers the chance of theft.
Getting Started
You can't go far wrong with an autowatch ignition device in order to guard your vehicle from theft. The device protects your vehicle from being started even if a criminal steals or copies the key. It is possible because of its advanced technology that stops the engine from starting until the right PIN code is entered.
The device connects to the vehicle's bus network CAN which allows direct communication with the ECU. It makes use of buttons already on the dashboard and the steering wheel to create a unique sequence only you know which makes it impossible for others to start your vehicle. This is the best security system to protect your car's pride and joy, keeping its value intact should you decide to sell it in the future.
Installing a ghost ignition is an easy procedure, but it's important to follow the instructions carefully to avoid problems with the electrical system and malfunctions. First, you have to locate and identify a constant 12V power source as well as an appropriate grounding point on the chassis of your vehicle. After that, you are able to begin to connect the wires that will be used to activate the immobiliser. Be sure to use high-quality connectors and soldering techniques to ensure a secure connection. Also, make sure to protect the connections by insulating them with heat shrink tubing and insulation tape to protect them from electrical short circuits and other problems.
Once the wires have been connected, you can connect the battery and start the engine to determine whether the immobiliser is functioning. Once everything is working properly, you can install it in a safe location under the dash or somewhere else in the vehicle. Be sure to conceal it securely so that a thief cannot get it into a compromising position.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a top-quality deterrent to car thieves. It is resistant to key cloning and hacking and cannot be disabled without the code. The device is also easy to use and is able to be put into the service valet mode to ensure that your vehicle is not activated when you bring it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to stop theft of vehicles. It is directly connected to the vehicle's CAN bus network and communicates with the ECU which makes it a virtually undetectable addition to your vehicle. The Ghost Immobiliser does not interfere with your vehicle's factory settings, unlike other aftermarket systems which require the removal of circuit elements.
The system is also undetectable by thieves using diagnostic scanners. This is due to the fact that it doesn't send and receive radio frequency signals, and it relies on CAN data to communicate with your ECU. It doesn't require any modifications to your current key fobs.
Enter your disarm sequence (either two or one button) and then turn on the ignition in your car to activate the Ghost Immobiliser. The indicator will flash two times to confirm that you have entered the correct code. Once you've verified this, you're able to start your vehicle and drive off in peace.
Once installed, Ghost Immobiliser guards your vehicle from key cloning or hacking while protecting its value. If you ever need to surrender your car to valet parking or for service The Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll need find the source of power that is constant (12V) and an earthing point. Make sure that both are well-insulated and safe to touch. Cable ties are also suggested for bundling and secure the wires. www.thekeylab.co.uk reduces the possibility of theft by potential thieves. To avoid committing mistakes, double-check these points and mark them with labels or tape. Examine every connection for signs that they're getting worn out. Connectors that are loose could cause malfunctions in the system, so make sure they're securely in place and properly insulated. Don't forget to test the Ghost Immobiliser after installation is completed. This will make sure that the unit is functioning properly, and that all connections are secure and insulated. Be sure to fix any problems immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that connects seamlessly with your vehicle's ECU to stop unauthorized motor starting. Its cutting-edge technology protects your vehicle from hacking and key cloning as well as other methods employed by thieves to steal vehicles. The Ghost also works in tandem with existing alarm and tracking systems to give the most complete protection for your vehicle. The Ghost's unique features, combined with its secluded design, make it a popular option for both car enthusiasts and security conscious drivers.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow all steps of the installation procedure. A good starting point is to refer to the wiring diagram for your vehicle that will serve as a roadmap for locating and connecting the wires required. You'll need to determine the power and grounding sources. Once you've found them you'll need to mark them so that they are easy to locate when installing. It is also vital to use only the best tools and materials. Basic hand tools can assist with making precise connections while a multimeter can verify electrical values and ensure security. Cable ties and insulation tape can help keep connections neat and tidy. A Ghost-specific user manual is also available.
Before proceeding with the installation, it's important to test the system by entering the PIN code and starting the vehicle. This test will verify that the immobiliser is working as intended, preventing unauthorised vehicle starts. This step should be performed frequently as part of your regular inspections of the vehicle to ensure that the system is always working correctly.
After the installation has been completed, you can begin driving your vehicle with confidence. The Ghost will safeguard your vehicle from thieves who might steal your car. It will ensure that no one can escape with your car without having the correct PIN code. The Ghost can be paired with an approved Thatcham tracker that identifies any attempts to steal or tamper with. This will allow you to track your vehicle if it is stolen.
The Ghost can be utilized in a variety of vehicles and is compatible with most major brands. If you are interested in protecting your car using this advanced device, contact Monty's Locksmith today to learn more about our installation and service options. We are a TASSA registered installer, which ensures that we adhere to strict standards for the installation of our products. This reassures customers, insurers and law enforcement officials that all installations are performed safely and correctly.